Joe Lewandowski, McCarthy PM on BJC Campus Renewal Phase 3
What innovative technologies and prefabrication methods are being used in modern hospital construction to improve safety and schedule efficiency?
McCarthy Building Company is deploying Revisto, a 3D coordination platform, combined with prefabricated bathroom pods and modular piping/ductwork racks to identify design conflicts before construction and reduce on-site material stockpiling. These methods cut congestion, accelerate installation, and tighten schedule delivery on the BJC Healthcare Campus Renewal Phase 3 project.
3D Coordination: Finding Problems Before the Crew Arrives
The core innovation is Revisto, a 3D coordination platform similar to Navisworks , which allows the team to work in both 3D and 2D combined fashion. This hybrid approach enables rapid identification and resolution of design conflicts—clashes between structural elements, MEP (mechanical, electrical, plumbing) systems, and architectural components—long before crews step on site.
By catching these issues in the virtual model, McCarthy avoids costly rework, delays, and safety hazards that would otherwise emerge during framing or finishing phases. The platform reduces field conflicts by allowing all trades to coordinate in a single visual environment , dramatically compressing decision cycles and keeping the project on schedule.
Off-Site Prefabrication: Speed and Control
McCarthy and its trade partners are prefabricating entire bathroom pods through a joint venture of local contractors, then flying them in to the site. This method removes one of the slowest and most error-prone trades from the congested job site—bathroom assembly now happens in a controlled factory environment with quality checks before delivery.
Beyond bathrooms, racks for piping, ductwork, and electrical conduit are also prefabricated and brought to site just-in-time, dramatically reducing the number of materials and workers crowding the site at any given moment. This lean approach minimizes congestion in an extraordinarily tight urban setting at Kings Highway and Barnes Place, where the hospital must remain operational throughout construction.
"We not only take pride in building for BJC, who's a national leader among health care organizations, but also feel special to be building a hospital that's so important to the people in and around St. Louis."
Joe Lewandowski — Project Director, Central Region, McCarthy Building Company. Lewandowski has been with McCarthy since 2005 and has dedicated his entire professional career to healthcare construction across the country. He directed the New Orleans VA Medical Center replacement, a billion-dollar campus that replaced critical medical infrastructure damaged by Hurricane Katrina, from 2013 to 2016. He is currently leading the construction team on Phase 3 of the BJC Healthcare Campus Renewal Project.
The podcast also explores how McCarthy manages logistics in a congested urban hospital environment where patient access and existing operations cannot be interrupted—a challenge unique to healthcare replacement projects in dense urban centers.
Revisto 3D coordination allows combined 3D/2D workflow to identify and resolve design conflicts before construction begins, preventing costly rework and delays.
Bathroom pods are prefabricated off-site by local trade partners through a joint venture and flown in, removing bathroom installation from the congested site.
Piping, ductwork, and electrical racks are prefabricated and delivered just-in-time, minimizing material stockpiling and reducing peak workforce pressure on site.
This combination of virtual coordination and lean logistics is essential in congested urban hospital settings where ongoing patient care must be maintained.
What makes healthcare construction project logistics in congested urban hospital settings particularly challenging?
The key is removing vehicles from the congested area entirely. Staging areas and radio-coordinated truck arrivals keep the intersection at Kings Highway and Barnes clear during construction, while lane widening on the south side of the plaza adds capacity to prevent bottlenecks.
Strategic Coordination at an Extraordinarily Congested Intersection
The intersection of Kings Highway and Barnes at the hospital plaza presents an extraordinarily congested space where normal construction logistics would create immediate gridlock. This is the site of the BJC Healthcare Campus Renewal Phase 3 project, where McCarthy Building Company is replacing the Queenie Tower—a 16-story replacement at a zero lot line configuration in the heart of St. Louis's dense medical district.
Joe Lewandowski's team approached the problem by fundamentally rethinking how trucks enter and leave the site. Rather than allowing vehicle traffic to pile up at the intersection, they established staging areas positioned away from the immediate congestion point . When construction materials or equipment are needed, trucks are radioed in on a schedule rather than arriving on demand. This prevents the intersection from becoming a holding pattern for waiting vehicles.
The second part of the strategy targets the underlying traffic flow. McCarthy minimized additional lane closures that the construction itself would impose, and the broader project includes widening the south side of Barnes-Jewish Plaza to add a new traffic lane . This additional capacity allows people and vehicles to travel through the space as smoothly as possible even while major construction is underway.
As Lewandowski explains in the episode , the goal is simple but demanding: keep the hospital fully functional, maintain public access to the plaza and surrounding streets, and execute a complex hospital replacement all at once. For a healthcare construction project of this scale in an urban setting, traffic coordination is not a side logistics issue—it is a core part of project success.
"We not only take pride in building for BJC, who's a national leader among health care organizations, but also feel special to be building a hospital that's so important to the people in and around St. Louis."
Joe Lewandowski — Project Director, Central Region, McCarthy Building Company. Lewandowski has been with McCarthy since 2005 and has dedicated his career to healthcare construction across the country. He led the $1 billion New Orleans VA Medical Center replacement project from 2013 to 2016, which rebuilt critical medical infrastructure damaged by Hurricane Katrina. He is currently directing the construction team on Phase 3 of the BJC Healthcare Campus Renewal Project, with the first patient expected in summer 2025.
One additional dimension often overlooked in congested hospital construction is the role of continuous communication and coordination with city traffic authorities, hospital operations, and local stakeholders. The episode dives deeper into how McCarthy is managing relationships with 100 to 150 trade partners on the job , each of whom needs clear direction on vehicle access and timing.
Forum Focus Podcast: Well-Read Carpenter Cordell Sawyer Builds Successful Firm
What are the most damaging payment term practices in the construction industry?
60, 90, and 120-day payment terms are now standard in construction , but they are particularly damaging to small and emerging minority and women-owned businesses. Large corporations understand how instrumental cash flow is to their own organizations, yet they do not apply the same logic when paying contractors—forcing smaller firms to finance their operations indefinitely.
The math of extended payment cycles is unforgiving for contractors operating on thin margins. When a small construction company completes a project worth $50,000 in material and labor costs, yet does not receive payment for 120 days, that firm must cover those expenses from its own cash reserves or credit lines. A single delayed project can destabilize a contractor's entire operation , preventing them from taking on new work, paying employees on time, or investing in equipment and growth.
This dynamic disproportionately impacts minority and women-owned businesses. These firms typically have less access to capital, thinner balance sheets, and weaker relationships with lenders than their majority-owned counterparts. As Cordell Sawyer explains in his episode of Forum Focus , what seems like a routine business practice to a large corporation can become an existential threat to a smaller firm.
The hypocrisy of cash flow logic
Large corporations fiercely protect their own cash flow—they negotiate favorable terms with suppliers, maintain working capital reserves, and structure their finances to ensure liquidity. They understand, fundamentally, that cash is operational oxygen. Yet those same corporations impose 120-day payment terms on contractors as if the contractor's cash flow constraints do not exist.
This represents a fundamental misalignment of values. If a corporation believes cash flow is essential to its own survival and growth, the logic should extend to its business partners. A contractor cannot build a $500,000 commercial project with 2% interest if they must wait four months to be paid. The risk is shifted entirely onto the contractor, who bears the cost of financing the owner's or general contractor's working capital.
The details of how this plays out on individual projects—from material procurement to labor scheduling—are explored in depth in this Forum Focus conversation , which reveals the cascading pressure these payment practices place on emerging construction firms.
Cordell Sawyer — Founder of Sled Rock Construction. Sawyer grew up in University City and worked as a janitor while reading books on wealth creation. He became one of the first apprentices to complete the carpenter's associate degree program through Balls Park Community College and was a union carpenter for ten years before founding Sled Rock Construction in 2009 during the recession. He built his business by investing carpenter wages into real estate, leveraging that equity to bankroll his construction company.
The broader implication is that extended payment terms function as an invisible barrier to entry for new and emerging contractors. They are not explicitly discriminatory, but they have a disparate impact on firms without deep capital reserves or credit access. A well-capitalized general contractor can absorb four months of unpaid receivables; a small MBE (Minority Business Enterprise) firm often cannot.
Changing this practice requires structural shifts—industry standards that reward faster payment, pressure from owners who demand ethical payment cycles from their contractors, and conversation and advocacy by construction leaders like Cordell Sawyer who have lived the damage firsthand.
How can a small contractor build visibility and overcome the credibility gap in construction?
Write a strategic business plan, join trade organizations, and attend every possible networking event to meet decision-makers in person . Cordell Sawyer built Sled Rock Construction by constantly cultivating new relationships while nurturing existing connections—a practice he credits as the foundation of 11 years of sustained growth in the competitive construction industry.
The gap between a small contractor and established firms often feels insurmountable, rooted in perception rather than capability. Sawyer's approach flipped this dynamic by making himself visible and accessible to those with purchasing power. Rather than waiting for opportunities, he positioned himself directly in rooms where decisions happen.
Starting with a formal business plan developed through an entrepreneurship program , Sawyer built credibility from day one. This wasn't a vague aspirational document—it was a concrete roadmap that demonstrated he understood his business, his market, and his growth trajectory. As Cordell Sawyer explains in the episode , this foundation gave him confidence and clarity during early conversations with potential partners and clients.
Visibility cannot be achieved through isolation. Sawyer joined trade organizations and made attendance at industry meetings non-negotiable . These weren't passive appearances—he positioned himself to engage, build familiarity, and demonstrate competence. For a small minority-owned contractor operating outside traditional networks, this direct personal engagement was essential to breaking through the assumption that his company lacked sophistication or capacity.
"Leveraging the relationships that we have built and maintained over these 11 years has been the key to growth."
Cordell Sawyer — Founder, Sled Rock Construction. A carpenter and entrepreneur from University City, Sawyer transitioned from 10 years of union carpentry work to founding his own construction firm in 2009 during the recession. He completed an associate degree through Balls Park Community College's apprenticeship program and pursued continued education through the Grace Hill Next Level Entrepreneurship Business Class, strategies that underpinned both his business acumen and his relationship-building discipline.
The persistence of relationship-building cannot be overstated. Sawyer didn't treat networking as a one-time activity. Instead, he embedded it into his operating rhythm—continuously cultivating new contacts while strengthening bonds with past collaborators and clients. This dual focus created a compounding effect: each relationship reinforced his reputation, expanded his network, and opened doors to larger projects.
A closer look at how Sawyer orchestrated his credibility turnaround emerges in the full episode conversation , including the specific moments where personal relationships directly translated into major commercial opportunities like the Love Travel Stop and the Missouri Botanical Garden Visitor Center projects.
Cordell Sawyer explained that the natural assumption is that minority-owned small businesses do not know what they are doing, creating a significant hurdle…
What are the three main paths to acquiring wealth that a carpenter should consider?
According to Cordell Sawyer, the three paths to acquiring wealth are real estate, owning your own business, or investing in the stock market. He chose real…
PODCAST: IBEW/NECA's Sylvester Taylor on Designing a Welcoming Construction Workforce
What role do changing political leadership demographics play in motivating organized labor to address diversity in construction?
When African-American mayors took power in Missouri's two largest economic hubs—St. Louis and Kansas City—for the first time in state history, they catalyzed a shift in how public contracts are allocated. These newly empowered leaders and their allies now control school boards and procurement decisions throughout the region, and they are explicitly demanding contractors demonstrate diversity or lose market access. This creates immediate financial pressure on organized labor to transform hiring practices, turning political representation into direct marketplace leverage.
The mechanism is straightforward: power brokers in the region control public spending and contracts. As Sylvester Taylor explains in the Forum Focus episode , when those decision-makers are themselves from historically excluded communities, they have both the authority and the motivation to enforce supplier diversity as a condition of doing business. This is not persuasion or voluntary ethics—it is contractual reality.
For construction unions and contractors, the stakes became concrete and immediate. Market share depends directly on the ability to field diverse teams on jobs awarded by these newly influential decision-makers. Taylor, who holds the first-ever joint diversity, equity, and inclusion position created between IBEW Local One and the National Electrical Contractors Association, saw this incentive structure reshape industry behavior in real time.
The political shift matters because it replaces abstract diversity appeals with enforceable procurement policy. As discussed in detail in the podcast episode , unions that had resisted change for decades suddenly faced a business case they could not ignore: adapt or lose revenue. This is how demographic change in electoral politics translates into structural change in an industry.
"I had to bite my tongue until it was my turn to swing. And then when it was my turn to swing, I swung as hard as I could."
Sylvester Taylor — Director of Diversity, Equity, and Inclusion Initiatives at The Electrical Connection (IBEW Local One and NECA St. Louis Chapter), and a 32-year electrician with the International Brotherhood of Electrical Workers. Taylor is co-founder and president of the Electrical Workers Minority Caucus and was appointed in March 2021 to lead the first-ever joint diversity, equity, and inclusion position created between IBEW Local One and the National Electrical Contractors Association—a position without precedent in the country. He also served as a representative for the 80th District in the Missouri House of Representatives from 2012 to 2019.
Taylor's quote captures a deeper truth about how this political shift works in practice: it is not just a change in who holds power, but a fundamental reversal in who gets to set the rules. For decades, organized labor resisted diversity initiatives while holding monopoly power over skilled trade access. Now, the gatekeepers themselves have changed, and the pressure has reversed direction entirely.
The cascade extends beyond direct procurement. When school boards and other power brokers throughout the region are increasingly African-American-led , they bring different priorities to decisions about apprenticeships, hiring, and workforce development partnerships. Youth services, training contracts, and facility construction—all now flow through decision-makers with lived experience of exclusion. This creates a self-reinforcing cycle: diverse leadership prioritizes diverse hiring, which builds pipelines that sustain and expand diverse workforces.
From electoral outcome to contract enforcement
The translation from political representation to labor market pressure does not happen automatically. It requires that leaders with newly acquired power actually use it to enforce diversity. In St. Louis and Kansas City, this happened because African-American mayors and school board leaders understood that they had an opportunity to reshape an industry that had historically excluded their communities. They leveraged procurement rules, contract stipulations, and supplier diversity programs as tools of enforcement.
For unions and contractors, this shift was disorienting but clear. What had been treated as a "nice-to-have" in previous administrations became a non-negotiable contract condition. The financial stakes—winning or losing public projects—made the compliance sudden and real, in a way that decades of civil rights argument had not.
The role of inside advocates
The pressure from above (procurement enforcement by diverse political leadership) met pressure from within: people like Taylor, who had spent 32 years inside organized labor while witnessing and experiencing exclusion, suddenly had formal authority to push change from inside the structure. His appointment as DEI director was not a symbolic role—it was designed to align labor supply with the new market reality created by political leadership change.
This combination—external enforcement through contracts, combined with internal advocacy by members who understood both the industry and the justice case—created a moment in which organized labor could not delay. The political shift did not persuade unions to change their values; it gave unions a business reason to match their actions to values many members already held.
How should contractors and unions approach hiring women and people of color to ensure genuine inclusion rather than superficial compliance?
Contractors and unions must place women and people of color in supervisory positions, not just entry-level roles —giving them the same chance to advance or fail that white male workers routinely receive. When a middle-aged white man fails on a job, the company hires the next white man; people of color and women deserve identical treatment, not exclusion from future opportunities based on a single person's performance.
Genuine inclusion in construction goes beyond hiring. As Sylvester Taylor explains in the episode , the industry has long operated on a principle of repeated second chances for majority workers—yet applies a one-strike policy to minorities. This structural bias starts at recruitment and extends through career progression.
The path to meaningful change requires contractors to examine their decision-making patterns. Leadership positions are where real institutional change begins . When women and people of color hold supervisory roles, they influence hiring, mentoring, and workplace culture from positions of authority—not as isolated entry-level hires dependent on a single supervisor's goodwill.
Taylor's argument directly challenges the tokenism that passes for diversity in many construction firms. Hiring one woman or one person of color at entry level and promoting them only if they outperform peers is both unfair and ineffective. As discussed in this podcast , the construction industry's traditionally exclusive culture has meant that recruitment and advancement operate under entirely different rules depending on a worker's race or gender.
"I had to bite my tongue until it was my turn to swing. And then when it was my turn to swing, I swung as hard as I could."
Sylvester Taylor — Director of Diversity, Equity, and Inclusion Initiatives at The Electrical Connection (IBEW Local One and NECA St. Louis Chapter). Taylor has been an electrician with the International Brotherhood of Electrical Workers for 32 years, co-founded and presides over the Electrical Workers Minority Caucus, and in March was appointed to lead the first-ever joint diversity, equity, and inclusion position created between IBEW and NECA nationally. He served as a representative for the 80th District in the Missouri House of Representatives from 2012 to 2019 and chairs the St. Louis County Fire Safety and Standards Commission.
The real metric of inclusion is whether contractors are willing to hire supervisors and leaders from underrepresented groups . This means not only recruiting women and people of color for entry-level apprenticeships—important as that is—but actively developing and promoting them into management, project leadership, and decision-making roles where they shape the industry's future.
A practical starting point involves unions and contractors auditing their current supervisory rosters and succession planning. If women and people of color remain concentrated in entry-level or trade positions after years of diversity initiatives, the organization is likely perpetuating the very inclusion theater it claims to address. Taylor's work with the newly created diversity initiative at IBEW Local One and NECA illustrates how intentional structural changes can reframe hiring and advancement across the electrical trades nationally.
What concrete example demonstrates the impact of early career entry in the electrical trades on economic mobility?
Taylor describes a young man he helped enter the trade at age 18 who, by age 21, purchased his first house. Taylor notes that this achievement puts the…
How many apprentices can IBEW Local One accommodate annually, and how does that compare to current demand?
IBEW Local One can take approximately 80 apprentices per year, based on industry work cycles. In the earlier part of the year discussed, the union…
What is the strategy to embed electrical trade curriculum into high school mathematics to increase apprenticeship qualification rates?
IBEW and NECA are embedding electrical trade math curriculum alongside standard high school mathematics, ensuring apprentices arrive with the required math skills already in place to succeed in apprenticeship programs. This partnership reduces failure rates in the apprenticeship math portion by preparing students during their high school years, rather than waiting until they enter the trade. They have identified pilot schools and are actively developing the implementation strategy with school districts and Missouri's Department of Elementary and Secondary Education.
A partnership designed to close the math readiness gap
The challenge is straightforward: many apprenticeship applicants lack the mathematical foundation needed to pass the apprenticeship math requirement, and this gap disproportionately affects young people from underserved communities. By embedding electrical trade math into the high school curriculum, as explained in the Forum Focus episode , IBEW and NECA aim to front-load this preparation.
Rather than treating math as an abstract subject, the strategy weaves real electrical problems and applications into standard mathematics . Students learn trigonometry, algebra, and geometry through the lens of wiring, circuit design, and load calculations—skills electricians actually use on the job. This approach keeps the rigor of high school math while making it directly relevant to the trades.
Pilot schools and district collaboration
Taylor and his colleagues have identified a couple of pilot schools to test this curriculum model. The work is not done in isolation: they are in active conversation with school districts and DESE to align standards and ensure the program fits within existing educational frameworks.
The plan of attack is still being refined, which means this is an evolving partnership—not a one-size-fits-all mandate. The key insight embedded in this conversation with Taylor is that workforce development cannot be solved by unions alone; it requires genuine collaboration with secondary education institutions that have the access and authority to shape what millions of young people learn.
Sylvester Taylor — Director of Diversity, Equity, and Inclusion Initiatives for The Electrical Connection (a partnership between IBEW Local One and the National Electrical Contractors Association). Taylor has worked as an electrician with IBEW for 32 years and serves as Recording Secretary of IBEW Local One and co-founder and president of the Electrical Workers Minority Caucus. He was appointed to this newly created national position in March—the first of its kind jointly between IBEW and NECA—and brings decades of experience in mentoring young people from underserved communities into careers in the electrical trades.
For a deeper look at how IBEW and Taylor are addressing the broader barriers young people face in entering electrical apprenticeships, and how this curriculum initiative fits into a larger diversity and inclusion strategy, listen to the full Forum Focus episode .
What specific barriers prevent young people, particularly those from underserved communities, from entering electrical apprenticeships?
Young people face educational inequity, lack of transportation, insufficient healthcare and childcare support, and 25 years of messaging that college is the only pathway to success. The math portion of the apprenticeship program is where the organization loses the most young participants, indicating that foundational academic preparation remains a critical bottleneck for underserved communities seeking entry into the electrical trades.
Why Math Skills Become the Stumbling Block
Advanced mathematics is a non-negotiable requirement for electrical apprenticeships, but young people from under-resourced school districts often lack the prerequisite preparation. This educational gap occurs long before apprenticeship recruitment begins , rooted in systemic disparities in K–12 math instruction and access to rigorous coursework.
As Taylor details in the Forum Focus episode , the math component is where IBEW Local One loses the highest number of candidates. Without intervention at the secondary level, the apprenticeship pathway remains locked for many young people despite their genuine interest and aptitude in the trade.
Beyond Education: Infrastructure and Life Support Systems
Educational barriers alone do not tell the full story. Young people from low-income and underserved communities often face compounding practical obstacles: no reliable transportation to apprenticeship sites, fragmented access to healthcare, and insufficient childcare options that would allow single parents to participate. These structural gaps exist outside the apprenticeship itself but directly determine who can realistically pursue the training.
Taylor's work addresses not just outreach but the ecosystem required for sustained participation. A young person may have the math skills and the motivation, yet lack the childcare arrangement or transit pass needed to show up consistently. What makes this work particularly notable, as discussed in the episode , is the recognition that recruitment and retention demand solutions far broader than posting job listings.
The Legacy of College-First Messaging
For the past 25 years, educational institutions and cultural messaging have pushed college as the singular legitimate pathway to economic mobility . This narrative has devalued skilled trades in public perception, steering young people—particularly those whose families lack trade-industry experience—toward debt-heavy four-year degrees rather than wage-earning apprenticeships.
The contrast is stark: electrical apprentices earn while they learn and graduate debt-free, while college graduates typically carry $70,000 to $80,000 in student debt . Yet this economic reality remains obscured by decades of cultural messaging that trades are a second-choice option. Reversing that mindset, as Taylor explains in his work with the Electrical Connection , requires sustained community engagement and visibility.
"I had to bite my tongue until it was my turn to swing. And then when it was my turn to swing, I swung as hard as I could."
Sylvester Taylor — Director of Diversity, Equity, and Inclusion Initiatives at The Electrical Connection (IBEW Local One and NECA St. Louis Chapter). With 32 years as an IBEW electrician, co-founder of the Electrical Workers Minority Caucus, and the first-ever director of this joint DEI position created by IBEW and NECA nationally, Taylor brings both lived experience and institutional authority to dismantling barriers that have historically excluded underserved communities from skilled trades careers.
A key detail from the episode worth hearing directly: Taylor's mentorship of young people has resulted in tangible life changes—including one young man who purchased his first house at just 21 years old, made possible by the stable, debt-free income from an electrical apprenticeship , a pathway many young people from underserved communities never learn exists.
Advanced math proficiency is required for electrical apprenticeships, but educational inequity in secondary schools leaves many young people from underserved communities unprepared, making this the highest dropout point in the process.
Practical barriers—lack of transportation, fragmented healthcare access, and insufficient childcare support—compound educational gaps and determine who can realistically participate, regardless of interest or aptitude.
Twenty-five years of college-centric cultural messaging has devalued skilled trades and steered young people toward debt-heavy degrees, obscuring the economic advantage of earn-while-you-learn apprenticeships.
Real inclusion requires solutions far broader than recruitment: community trust-building, ecosystem support, and sustained mentorship that addresses interconnected barriers simultaneously.
How does the practice of counting minority workers on individual projects versus actual workforce diversification differ?
Simply placing minority workers on a job to meet participation requirements solves an immediate problem on paper, but workers are often laid off once the project ends , meaning no lasting change occurs. Real workforce diversification demands retention and ongoing career opportunity, not just hiring numbers that disappear when the contract does.
The difference between hitting numbers and building careers
Sylvester Taylor draws a sharp distinction between compliance hiring and genuine diversity work. Putting six people on a job fulfills a diversity quota for that specific project, yet fails to address what happens after. The workers leave, the project closes, and the construction firm's actual workforce composition remains unchanged. This approach treats minority participation as a checkbox rather than a human career path.
As Taylor explains in the episode , the construction industry has long relied on this transactional model. A contractor hires to meet contract requirements, then sheds workers when the job is done. The cycle repeats: hire for the requirement, lay off after completion, no institutional learning, no advancement, no pipeline. For workers, this means precarious employment and no pathway to stable, skilled careers in the trades.
Retention as the measure of real diversity
True diversity is measured by who stays and advances , not by who gets hired for a single project. Taylor emphasizes that meaningful change requires systems designed to keep workers in the field, develop their skills, and create pathways to supervisory and management roles. This demands intentional mentorship, apprenticeship programs, and employer commitment to minority workers beyond contract completion.
This perspective is grounded in Taylor's 32 years as an electrician with the International Brotherhood of Electrical Workers and his role as co-founder and president of the Electrical Workers Minority Caucus. His appointment in March to lead the first-ever joint diversity, equity, and inclusion position created between IBEW Local One and the National Electrical Contractors Association signals a shift toward systemic change rather than project-level compliance. A detail worth hearing directly from Taylor: the episode explores his mentorship of a young man who, at just 21 years old, purchased his first house through a career pathway in the trades —a concrete outcome of retention and opportunity that temporary project placement cannot produce.
"I had to bite my tongue until it was my turn to swing. And then when it was my turn to swing, I swung as hard as I could."
Sylvester Taylor — Director of Diversity, Equity, and Inclusion Initiatives at The Electrical Connection (a partnership between IBEW Local One and NECA St. Louis Chapter). Taylor has served as an IBEW electrician for 32 years, co-founded the Electrical Workers Minority Caucus, and previously represented the 80th District in the Missouri House of Representatives from 2012 to 2019. He now leads the first-ever joint DEI position of its kind in the country between a major labor union and a contractors association.
Project-based minority hiring fulfills compliance requirements on paper but creates no lasting workforce change if workers are laid off when the project ends.
Real diversification is defined by retention, skill development, and career advancement opportunities—not by temporary placement numbers.
Systemic change requires intentional mentorship, apprenticeship pipelines, and employer commitment to minority workers beyond individual contracts.
The construction trades have historically relied on transactional hiring models that treat diversity as a checkbox rather than a human career pathway.
What does it mean to get minority communities into rooms that have been historically closed to organized labor in the construction trades?
It means deliberately connecting elected officials, business owners, and contractors with opportunities where they typically do not work together —and ensuring IBEW and NECA are present during those critical decision-making conversations. Historically, organized labor shut out African-American participation, which caused those communities to close their doors in return. Taylor's work reverses that dynamic by rebuilding trust through direct access to economic opportunity.
The challenge runs deep. For decades, minority communities were systematically excluded from organized labor's rooms —from apprenticeship pipelines to job site decisions to union participation itself. This wasn't an accident; it was policy. When doors slammed shut, the communities on the outside responded by not trusting the very institutions that had rejected them.
Breaking that cycle requires more than apologies. As Sylvester Taylor explains in the Forum Focus episode , it demands structural change: placing minority-owned businesses, city leaders, and union representatives in the same room, at the same table, making decisions together from the start. When contractors and community members see IBEW and NECA showing up as genuine partners—not outsiders arriving after decisions are already made—the conversation shifts.
From Exclusion to Intentional Inclusion
Taylor's appointment in March to lead the first-ever joint diversity, equity, and inclusion director role between IBEW Local One and NECA reflects this new commitment. This is the first position of its kind in the country —a signal that organized labor is serious about inclusion, not just performative.
The work is concrete: connecting elected officials with contractors; introducing community business owners to union opportunities; ensuring that when decisions get made about major projects or apprenticeship classes, minority voices are in the room. Taylor's 32 years as an IBEW electrician and his co-founding role with the Electrical Workers Minority Caucus give him credibility with both sides—he knows the history of exclusion and the machinery of change from the inside.
What makes this different from past token gestures is the deliberate placement of decision-making power . Not consultation after the fact. Not interviews about "diversity initiatives." Actual seats at the table where contracts are awarded, apprentices are selected, and career pathways are determined. A point Taylor reinforces through his earlier years serving as a representative for the 80th District in the Missouri House of Representatives—he understands that political power and economic access are inseparable.
"I had to bite my tongue until it was my turn to swing. And then when it was my turn to swing, I swung as hard as I could."
Sylvester Taylor — Director of Diversity, Equity, and Inclusion Initiatives at The Electrical Connection (IBEW Local One and NECA St. Louis Chapter). With 32 years as an IBEW electrician, co-founder of the Electrical Workers Minority Caucus, and former Missouri state representative, Taylor brings both lived experience and institutional authority to building pathways into organized labor for communities historically locked out of the construction trades.
If you want to understand how deeply this mentorship runs in Taylor's approach, the full episode details his work with the St. Louis Division of Youth Services —where he has mentored young people into careers in the electrical industry, including one apprentice who purchased his first house at just 21 years old, a milestone few young people from excluded communities can reach through traditional education alone.
Organized labor historically excluded African-American participation, causing communities to distrust the entire system in return.
Inclusion requires placing minority-owned businesses, elected officials, and contractors in decision-making rooms from the start, not after the fact.
IBEW and NECA created the first-ever joint diversity director role in the country to formalize this commitment to structural change.
Economic opportunity must be paired with political presence—communities need actual power in the room, not just representation.
FORUM FOCUS PODCAST: NECA's Doug Martin on 45 Years of Management-Labor Collaboration
What role did PRIDE play in reducing work stoppages and relocating labor-management conflict from job sites to the negotiation room?
PRIDE emerged in the 1960s and 1970s as a structured initiative to end work stoppages plaguing the electrical contracting industry. The program created a formal channel for labor-management disputes into negotiation rooms , shifting conflicts away from active job sites where demonstrations and work disruptions were costing the industry jobs and damaging customer relationships.
Ending Disruption on Job Sites Through Structured Negotiation
Work stoppages and labor demonstrations on active construction projects were a persistent drain on the electrical contracting industry. When disputes erupted on job sites, they didn't just affect the two parties in conflict—they disrupted customers, damaged project timelines, and created uncertainty for the broader workforce. PRIDE solved this by establishing formal negotiation processes that gave management and union representatives a dedicated space to resolve disagreements before they could become public conflicts.
As Doug Martin explains in the episode , this shift represented a fundamental change in how the construction industry approached labor relations. Rather than using the job site itself as the arena for conflict, PRIDE created expectations and infrastructure for disputes to be addressed at the negotiation table. This protected both contractor operations and worker interests, while preserving the industry's reputation with clients.
"I've worked my whole career with an organization that simply wanted to build an appropriate and productive relationship with our labor partners."
Doug Martin — Executive Director (recently stepped down), St. Louis Chapter National Electrical Contractors Association (NECA). Martin grew up in western Montana in a copper mining family; his grandfather held multiple leadership positions, including president of Local One of the Miners Union in Butte, which had over 40,000 members at its peak. After college, he worked as an explosive apprentice in the mines for less than two years before being encouraged to leave the industry. He joined NECA as a trainee in fall 1977, became assistant manager in March 1978, and has spent over 40 years building labor-management collaboration in the St. Louis construction industry.
The effectiveness of PRIDE lay in its prevention of customer-facing disruptions . By containing labor disputes within a negotiation framework, the program ensured that contractors could maintain steady project delivery and that unions could advocate for their members without resorting to job-site work stoppages. This dual benefit created long-term stability in the industry and established a model for adversarial parties to find common ground. For more details on how this framework evolved in the St. Louis region, listen to the full conversation between Doug Martin and Tom Finan about the history of labor-management collaboration.
PRIDE emerged in the 1960s and 1970s specifically to address chronic work stoppages in electrical contracting.
The initiative redirected labor-management conflicts from job sites to formal negotiation rooms, protecting project delivery and customer relationships.
Structured negotiation processes reduced the industry's reliance on demonstrations and work disruptions as dispute resolution mechanisms.
This shift allowed both contractors and union representatives to address disagreements through productive dialogue rather than public conflict.
How did management and labor collaborate to preserve prevailing wage standards in Missouri?
A coalition of management and labor leadership spent a decade modernizing Missouri's Preventive Wage Law, preserving core protections for construction workers' safe and fair wages while making the law more receptive to competition. The effort ensured that tax dollars support construction work conducted by skilled, properly paid workers rather than undercutting standards through cheaper, less skilled providers.
The preservation of prevailing wage standards in Missouri represents a rare moment of unified advocacy across two traditionally opposing sides of the construction industry. Rather than fighting over which side would win or lose, management and labor recognized a shared interest in protecting the integrity of the construction market itself.
Doug Martin, who spent over 40 years building these relationships as part of his work with the electrical contractors industry, explains how this collaboration took shape. As he describes it in the Forum Focus episode , the challenge was not choosing between protecting workers or enabling business growth—it was designing a system that could do both.
Ten years of modernization without compromise
The 10-year scrutiny of Missouri's Preventive Wage Law was not a quick agreement. Instead, it required sustained dialogue and incremental refinement. Both sides agreed to modernize the law in ways that addressed concerns about regulatory flexibility while defending the fundamental protection: no public dollars would fund substandard labor practices.
This approach created a model where competition could flourish—but not through a race to the bottom on wages. Companies could still compete on efficiency, innovation, and service quality. The wage floor, however, remained non-negotiable. The specific protections that emerged from this process reflected a pragmatic understanding: when tax dollars are involved, society has a right to expect both fair wages and skilled work.
"I've worked my whole career with an organization that simply wanted to build an appropriate and productive relationship with our labor partners."
Doug Martin — Executive Director (recently stepped down) of the St. Louis Chapter National Electrical Contractors Association (NECA) and co-chair of the St. Louis Construction Cooperative. Martin grew up in western Montana in a copper mining family, with his grandfather serving as president of Local One of the Miners Union in Butte during its peak of over 40,000 members. After brief work as an explosive apprentice in the mines, he joined NECA in fall 1977 as a trainee and became assistant manager in March 1978, devoting four decades to reshaping labor-management dynamics in the St. Louis construction industry from adversarial conflict to structured partnership.
The preservation effort also demonstrates how institutional memory and trust matter . A coalition built over decades, with leaders who had worked together through multiple cycles of negotiation and crisis, could navigate complex policy issues without defaulting to zero-sum thinking. The outcome was neither a labor victory nor a management victory—it was an industry victory.
For more detail on how this partnership manifested in other structural changes to the electrical contracting field, Doug Martin discusses the broader evolution of NECA's workforce strategy and apprenticeship model in the full episode.
What new diversity and inclusion infrastructure did NECA create to address historical barriers in electrical contracting?
NECA created a dedicated Director of Diversity, Equity, and Inclusion position for the first time in the last 18 months and implemented maternity leave benefits in its health plan to support journeywomen and apprentices during pregnancy. The organization also shifted recruitment strategy from passive participation in broad programs to active recruitment in schools and trade shows, leveraging minority contractors and journeymen to eliminate stigma and dismantle historical barriers.
From Passive Hope to Active Recruitment
NECA's diversity transformation didn't start with an infrastructure overhaul alone. As detailed in the Forum Focus episode , the organization recognized a fundamental flaw: hoping that minority candidates would simply trickle down from broad, generic recruitment programs was insufficient. The shift required genuine effort and visibility.
Doug Martin emphasized that active recruitment in schools and trade shows replaced the old model of waiting for candidates to discover the industry on their own. By showing up directly where potential electricians were learning and considering their futures, NECA made opportunity visible and tangible. This presence alone sent a signal: the electrical contracting industry was actively looking for diverse talent.
Leveraging Internal Champions to Break Down Barriers
One of the most powerful structural decisions was placing minority contractors and journeymen at the center of recruitment efforts . These internal champions could speak authentically about their own careers, dismantle misconceptions, and show younger electricians and apprentices—especially those from underrepresented backgrounds—that success in this field was achievable for them too.
This peer-to-peer credibility is what generic outreach cannot replicate. When someone who looks like you and comes from your community tells you the path is open, the message lands differently. The infrastructure Doug Martin and NECA built was less about a single program and more about embedding diverse role models throughout the recruiting and training pipeline .
The maternity leave benefit further signaled institutional commitment. As described in this podcast conversation , journeywomen and apprentices had historically faced a choice: stay in the trade or start a family. By removing that false choice through concrete benefits, NECA addressed a barrier that had been invisible to much of the industry for decades.
"I've worked my whole career with an organization that simply wanted to build an appropriate and productive relationship with our labor partners."
Doug Martin — Executive Director of the St. Louis Chapter National Electrical Contractors Association (NECA), recently stepped down. Doug grew up in western Montana in a copper mining family, with his grandfather holding multiple leadership positions including president in Local One of the Miners Union in Butte, which had over 40,000 members at its peak. After college, he worked as an explosive apprentice in the mines for less than two years before being encouraged to leave the industry. He joined NECA as a trainee in fall 1977 and became assistant manager in March 1978, spending over 40 years building labor-management collaboration in the St. Louis construction industry and now serving as co-chair of the St. Louis Construction Cooperative.
Doug Martin's philosophy of building appropriate relationships extended into diversity work—recognizing that inclusion isn't a box to check, but a structural commitment that touches every part of how an organization operates. The details of how NECA also evolved its apprenticeship model to double the pipeline capacity reveal the full scope of this transformation, explored further in the full episode .
What structural changes to apprenticeship recruitment doubled the number of electricians entering training?
NECA replaced its single annual recruiting cycle with a continuous probationary apprenticeship model that placed new candidates directly into entry-level contractor positions after basic safety training, rather than waiting for classroom availability. This shift allowed candidates to perform actual electrical work and gain hands-on understanding of construction while maintaining year-round active candidate lists, ultimately doubling enrollment into the training program.
From Classroom-Limited Intake to Year-Round Work Placements
The original NECA recruiting system operated within a single annual cycle tied to classroom capacity —the association recruited candidates once per year and placed one class based on how many students the training classroom could hold. This rigid timing created a bottleneck: talented candidates who showed interest at the wrong time of year had to wait a full year or move on to other opportunities.
The probationary apprenticeship model fundamentally changed this constraint. Instead of waiting for classroom seats, new recruits were placed into active electrical work with contractors after completing basic safety training. This allowed them to earn while learning, perform real construction tasks, and understand the actual demands of the trade before stepping into formal classroom instruction.
As Doug Martin explains in the Forum Focus episode , this shift expanded placement timing to match actual job availability in the market, rather than forcing job opportunities to fit an arbitrary academic calendar.
Expanding Access for Candidates with Diverse Skill Profiles
The probationary model also created alternative slower-paced programs for candidates with strong mechanical skills but lower proficiency in math and science . Rather than using traditional academic prerequisites as gatekeepers, NECA could now assess aptitude through hands-on work and provide supplemental math and science instruction alongside field training.
This flexibility opened the apprenticeship pipeline to candidates who might have scored poorly on standardized tests but possessed genuine mechanical talent and the work ethic to succeed in construction. The result was immediate and measurable: enrollment doubled once these structural barriers fell away.
"I've worked my whole career with an organization that simply wanted to build an appropriate and productive relationship with our labor partners."
Doug Martin — Executive Director of the St. Louis Chapter National Electrical Contractors Association (recently stepped down). Martin grew up in western Montana in a copper mining family and worked as an explosive apprentice in the mines before joining NECA in fall 1977 as a trainee through the national office recruiting program. He became assistant manager in March 1978 and has spent over 40 years building labor-management collaboration in the St. Louis construction industry, driving initiatives like the probationary apprenticeship model that doubled training enrollment and created pathways for workers previously excluded by traditional academic requirements.
For those curious about how this partnership philosophy applied more broadly, Martin's experience of transforming decades of adversarial labor-management conflict into productive partnership is detailed in the full podcast conversation .