IANA Intermodal Expo 2026 Recap
What preventative maintenance and inspection practices can reduce out-of-service violations in intermodal drayage operations?
Most out-of-service violations can be prevented before a truck ever leaves the yard. Building a genuine inspection culture —supported by proper pre-trip training tied to real operating conditions, responsive maintenance, and incentive structures that reward prevention—eliminates the cheapest breakdown of all: the one you catch before departure.
The key insight is structural: many freight operations still measure success almost exclusively by on-time performance, which inadvertently pushes drivers and dispatchers to defer or skip critical pre-trip inspections. A breakdown discovered in the yard costs time, but at least the truck hasn't left yet. A breakdown on the road creates a failed delivery, lost revenue, and regulatory violations.
Pre-trip training must be grounded in the actual conditions drivers face —not generic safety videos. This means training that reflects the weight distributions, terrain, weather patterns, and equipment configurations specific to a driver's regular routes. When drivers understand why they're inspecting specific components, they're more likely to perform those inspections consistently.
Responsive maintenance is equally critical. If a driver reports a steering issue or brake wear during a pre-trip, the maintenance team must be resourced to address it the same day. Delays between inspection and repair create a gap where a vehicle can leave the yard in unsafe condition. This is where real-world asset intelligence tools discussed at the IANA Intermodal Expo become operationally relevant—they flag problems before they become violations.
Incentive alignment is the final lever. Operations that reward both on-time performance and violation-free records see faster adoption of inspection discipline. When bonuses or performance metrics equally weight safety compliance alongside delivery speed, the yard inspection culture shifts from a box to check to a core operational practice.
The economics of early detection
The phrase most operators repeat is simple: "The cheapest breakdown is the one identified before the truck leaves the yard." This is not about avoiding minor repairs. Out-of-service violations issued by the Commercial Vehicle Safety Alliance or Department of Transportation inspectors carry fines, driver record hits, and potential shipper contract penalties. A single violation can cost $1,000 to $10,000 in fines alone, plus the loss of revenue during any mandatory downtime.
Prevention infrastructure—dedicated inspection bay time, trained pre-trip personnel, maintenance response protocols—requires upfront investment. But the return is almost immediate: one prevented violation pays for weeks of inspection program overhead. As the freight and intermodal community discussed at recent industry forums , operations that treat inspection as a revenue-protection function, not a compliance checkbox, see measurable reductions in DOT violations within 90 days.
Culture over compliance
The difference between a violation-prone operation and one with strong safety records rarely comes down to equipment quality alone. Two fleets with identical truck models and maintenance budgets can have vastly different violation rates. The variable is culture: whether drivers and maintenance teams view inspections as protecting their livelihood and the company's revenue, or as bureaucratic overhead.
Building that culture requires consistent messaging from operations leadership that inspection discipline is non-negotiable. It also requires removing the time pressure that forces shortcuts. If a driver's pre-trip inspection is rushed because the dispatch window is tight, the inspection becomes performative. Industry leaders continue to emphasize this point at intermodal forums : logistics is about moving freight on time, but not at the cost of putting unsafe equipment on the road.
Prevent violations before departure by embedding inspection as a core operating procedure, not a compliance afterthought.
Align incentives to equally reward both on-time delivery and violation-free records, eliminating the false choice between speed and safety.
Invest in responsive maintenance that addresses findings from pre-trip inspections on the same day, closing the gap between detection and repair.
Train drivers on real operating conditions specific to their routes, making inspections meaningful rather than rote.
How can trusted trade data and cargo information be used earlier in the terminal placement process to improve freight accessibility?
When terminals receive trusted trade data showing a container is low-risk or already cleared, they can position that cargo in accessible locations instead of burial stacks , reducing re-handles and improving dispatch efficiency. This early intelligence gives shippers accurate answers about freight availability and creates more predictable ramp flows.
The core challenge in intermodal operations is the gap between regulatory clearance and physical accessibility. A container can have its customs paperwork complete but still be physically blocked by other cargo in a terminal stack. Using trusted trade data earlier in the placement process means terminals can make smarter positioning decisions from the moment a container arrives.
This approach delivers multiple operational benefits. Fewer re-handles mean less equipment movement and lower handling costs. Improved dredge dispatch keeps rail operations running on schedule. Faster chassis turns reduce equipment sitting time. And predictable ramp flows allow trucking operations to plan pickups with confidence. The result is a supply chain where freight actually moves when it should move.
As discussed in the episode from the IANA Intermodal Expo 2026 , this capability depends on better visibility across the entire intermodal ecosystem—a conversation that brought together terminals, rail carriers, trucking providers, and technology firms all focused on the same operational friction point.
The shipper benefit is equally concrete. Instead of uncertain wait times, they receive a reliable answer about when freight is actually available for pickup. This predictability flows upstream into planning and downstream into customer commitments, making the entire supply chain more responsive to real demand.
Implementation requires terminals to trust the data sources they're receiving. Systems like CTPAT pre-clearance and customs collaboration agreements lower the risk profile of containers entering the supply chain. When that trusted signal is paired with real-time positioning intelligence, terminals can move from reactive stacking to proactive placement.
The broader context, explored in detail in this podcast , shows how AI and asset intelligence tools are now making this real. Technology firms were demonstrating at the expo how early problem visibility—not just tracking after the fact—transforms terminal operations and equipment protection.
Why terminal placement matters to entire supply chains
A single positioning decision at a terminal ripples across the entire freight network. If a container stays buried in a stack, it misses a rail cutoff. The shipper then waits for the next train, and the freight either sits longer or defaults to trucking. A terminal delay becomes a modal choice , often shifting freight from rail to highway simply because timing became unreliable.
This is why the intermodal community—railroads, ports, motor carriers, and technology providers—all converged on this same question during the IANA Expo. The conversation wasn't abstract. It was about whether the physical system could actually deliver on service promises. Early data intelligence is the mechanism that bridges the gap between intention and execution.
FreightFlow Advisor Team — Market Intelligence Analysts covering intermodal supply chain operations, freight network efficiency, and the systemic barriers preventing containers from moving on schedule.
The technology and process layers required to achieve this are already emerging. Cargo theft prevention systems, cyber risk mitigation, and automation at the ramp all support the same goal: seeing problems earlier so they don't cascade into delays. As explored in the IANA expo recap , this shift from reactive to proactive visibility is reshaping how the industry operates.
What is the difference between a container that is cleared by customs and one that is physically movable in intermodal freight operations?
Clearance by customs is purely a regulatory status documented on paper —it means the cargo has passed compliance checks. Physical movability is operational readiness: the container must actually be accessible, not buried in a stack or blocked by misplaced equipment at the terminal. The supply chain moves equipment, not documents.
This gap emerged as a core theme at the IANA Intermodal Expo 2026 , where supply chain leaders wrestled with a fundamental question: can freight actually move when the supply chain says it should?
A container with all clearances in place may still sit immobilized at a terminal because its physical location makes it inaccessible. Another piece of equipment, staged in the wrong position, can block an entire stack . A driver arrives to pick up a "cleared" container only to find it pinned behind other cargo. The paperwork says go; the yard says wait.
This distinction matters because it exposes a real operational risk. Shippers and carriers often track customs status as a proxy for readiness, but clearance alone guarantees nothing about actual pickup availability. Operational visibility—knowing where equipment sits and what blocks access—is the second half of the problem .
Cleared (Regulatory Status)
A container has satisfied CTPAT (Customs-Trade Partnership Against Terrorism) inspection and customs documentation. All compliance paperwork is complete. Movable (Operational Status)
The container is physically accessible and unobstructed for immediate pickup by a driver or equipment handler. The real cost of this gap shows up in missed appointments and supply chain delay. As discussed in the IANA Intermodal Expo coverage , delays at a terminal ripple across the entire network—a missed drainage appointment becomes a missed rail cutoff, which becomes freight staying on the highway longer than planned.
Solving this requires two parallel systems: regulatory compliance (customs clearance) and real-time asset intelligence (physical location and accessibility). Companies now rely on asset tracking and yard visibility tools to bridge the gap , showing dispatch exactly which containers are both cleared and movable at any moment.
Why This Distinction Shapes Intermodal Operations
Intermodal freight moves cargo across ship, rail, and truck while keeping it in the same container. Each handoff is an opportunity for delay. When a container is cleared but not physically available, the handoff fails—a truck can't depart, a rail cutoff is missed, and the entire mode sequence collapses.
Terminal operations are inherently complex: containers stack vertically, equipment gets repositioned, and blocking situations arise quickly. A yard that treats clearance as sufficient—without confirming physical accessibility—courts operational failure . The solution is integration: customs clearance status feeding into yard management systems that track real-time positioning.
The broader IANA Intermodal Expo conversation highlighted how asset intelligence and automation are becoming central to solving these blocking problems—allowing freight companies to see constraints earlier and keep the physical system aligned with regulatory status.
What are the two competing strategies for how rail should win more freight from trucking?
BNSF CEO Katie Farmer argued that rail must win through stronger collaboration, commercial responsiveness, and shipper optionality—meaning the ability to choose among railroads with commercially viable routes and negotiating leverage. Union Pacific CEO Jim Vena argued that rail must win through consolidation, fewer handoffs, and a seamless single-line rail…
What specific operational problem did Union Pacific identify in the Norfolk Southern to Union Pacific corridor from Harrisburg, Pennsylvania to Salt Lake City?
Today, a container can move by Norfolk Southern to Chicago, be unloaded at Norfolk Southern's 47th Street Terminal, trucked roughly 20 miles to Union Pacific's Global 2 Terminal, reloaded, and sent west on Union Pacific. Union Pacific says that process can add up to 36 hours of transit time. A combined railroad would replace that lift, dray, and reload with…
What does Oliver Wyman's 2025 shipper survey reveal about why shippers are shifting freight from rail to truck?
Oliver Wyman's 2025 shipper survey found that at least half of shippers actively shifting freight from rail to truck cited lack of railroad responsiveness as a main reason. The survey also found that pricing is a critical modal decision factor and that shippers remain frustrated by the complexity and slow commercial response.
How does BlackBerry Radar combine equipment data to improve operational decision-making in intermodal logistics?
BlackBerry Radar helps transportation operators combine equipment location, activity, and condition data with business information so teams can identify priorities and act more proactively. The platform provides utilization data based on start-stop movements, geofences for detention and dwell time, and integrates with YMS, TMS, UMS systems and ELD providers…
What specific performance improvement did BlackBerry Radar achieve in its work with DCLI?
BlackBerry Radar reduced inspection lead time by 33% in its work with DCLI, and DCLI intends to incorporate Radar across 100,000 units. This demonstrates how asset intelligence—not merely knowing where a unit is, but using that information to get the right equipment in front of the right team—delivers practical operational value.
What are the key deployment conditions for Field AI's physical autonomy software in freight environments?
Field AI's autonomy software is designed to help robots operate in real-world, unstructured environments where GPS can fail, layouts change, and people move through the space. The software enables autonomous systems to understand uncertainty and perform useful work without needing a perfectly mapped and controlled environment. For freight, this points…
What deadlines apply to parties seeking formal status in the Surface Transportation Board review of the proposed Union Pacific and Norfolk Southern merger?
Interested stakeholders who want formal party of record status have until September 30th, 2026 to file a notice of intent to participate. Comments, protests, requests for conditions, and other opposition filings are due November 18th, 2026.
Ocean Freight’s New Operating Model
How do sourcing diversification decisions create logistics network exposure?
When manufacturers move production to Vietnam, Indonesia, Thailand, Cambodia, India, or Mexico to escape China-dependent supply chains, they reallocate manufacturing risk — but diversifying sourcing without diversifying logistics simply shifts freight risk to ports that lack the infrastructure to handle it . The result: congestion, loading delays, and material cost exposure precisely where companies expected cost relief.
The logic appears sound on paper. Spread suppliers across multiple countries, and you reduce dependency on any single geography or geopolitical flashpoint. But as explored in The FreightFA Brief Podcast , most companies execute only half the strategy. They diversify manufacturing but continue routing all freight through the same logistics corridors — often the congested Southeast Asian ports already under pressure.
Developing ports in Vietnam, Thailand, and Indonesia face material congestion challenges and loading delays that developed hubs like Singapore or Hong Kong do not. When a shipper fragments sourcing across five countries but funnels all consolidation through a single, understaffed Thai port, that port becomes the bottleneck. The purchasing department saved money on labor costs. The supply chain department absorbed it as schedule risk and premium rates.
A deeper layer compounds the problem. According to market data covered in the episode , approximately 11% of global container ship capacity sits idle outside ports , waiting to discharge or load. That capacity exists, but it is not available where shippers actually need it. A vessel delayed at a congested Southeast Asian port does not reduce overall capacity — it removes reliable capacity from the lanes shippers depend on. Reliability, in freight terms, is capacity.
Logistics Diversification means routing sourced freight through multiple ports, carriers, and corridors — not just multiple factories. A shipper sourcing from Vietnam and Thailand should consolidate through both Bangkok and Ho Chi Minh City ports, or add a non-congested third hub, rather than forcing all volume through a single gateway. The financial consequence is immediate. Carriers managing capacity across routes where 10–14% of scheduled sailings were cancelled in the first half of 2026 (as they were across Asia-to-U.S. East Coast and West Coast lanes) prioritize reliable customers with predictable volume patterns. Shippers whose freight arrives in bursts at already-congested ports rank lower in allocation. Premium charges follow, alongside longer transit times and reduced visibility into when freight will actually move.
The episode also details how contract rates on Asia-to-U.S. routes have risen 40–41% in parallel with spot rate pressure , signaling that shippers can no longer rely on negotiated agreements to insulate them from volatility. This amplifies the risk: a shipper with fragmented sourcing at a congested port has no fallback capacity and faces renegotiation on every renewal.
"Reliability is not just a service metric. It is capacity."
FreightFlow Advisor Team — Market intelligence analysts at FreightFlow Advisor, specializing in real-time container shipping dynamics and supply chain network optimization.
The solution is structural, not tactical. As emphasized throughout the analysis , sourcing diversification must be paired with logistics diversification. This means:
Map freight flows by actual destination port performance, not just origin. A Malaysia supplier feeding the U.S. West Coast should not consolidate in Bangkok if Port Kelang offers faster vessel departure cycles. Build consolidation logic around port reliability metrics , not shipping cost alone. Second, segment suppliers by port gateway: commit some volume to faster regional hubs and reserve others for lower-cost gateways during peak seasons. This reduces the bet on any single port's congestion cycle.
Third, negotiate with carriers around vessel reliability and schedule adherence, not just rate per container. A carrier offering 98% schedule reliability at a 5% premium is cheaper than one quoting a lower rate but running 85% on-time performance — because the delayed shipment triggers expedited inland transport, expedited ocean transport, or production line pause.
What contract provisions should address disruption in volatile ocean shipping environments?
Every ocean freight contract must explicitly cover seven critical areas: routing changes, emergency surcharges, notice periods, force majeure, service failures, allocation treatment, and cargo already in transit. Most agreements are written for stable conditions—but freight teams need them to actually function when disruptions strike.
Why Standard Contracts Break Under Stress
The ocean freight market has shifted fundamentally. Effective capacity is now constrained by congestion and geopolitical disruption , not by the total number of ships available. When a vessel skips a port, gets rerouted around Africa, or sits idle waiting for dock space, shippers need explicit contract language telling them exactly what happens next.
Carriers have withdrawn between 10 and 14 percent of scheduled capacity across major east-west trades in 2026. In this environment, a vague contract creates chaos. As discussed in this episode of The FreightFA Brief Podcast , reliability has become a capacity problem—and that changes everything about how you negotiate protection.
The Seven Provisions Every Contract Needs
Routing and diversion rights must specify not just acceptable alternate routes, but what happens when a carrier chooses an unexpected path. If a vessel is rerouted around the Cape of Good Hope or Strait of Hormuz instead of the Red Sea, does the shipper absorb the cost or delay? The contract must say.
Emergency surcharges need clear thresholds. When do they trigger? Who approves them? Are they capped? Long-term contract rates have already spiked 40–41 percent in recent months, and shippers must know in advance whether further fees are possible mid-contract.
Notice periods for service changes protect both sides. If a carrier cancels a scheduled sailing, how much notice does the shipper receive? What if the notice is shorter? The contract should define minimum lead times and remedies if they're not met.
Force majeure language must be precise. Geopolitical disruptions, port congestion, and equipment shortages are no longer extraordinary—they are structural. The contract should define what qualifies, what doesn't, and how long a shipper can wait before the carrier is released from liability.
Service failure remedies clarify what happens when a vessel misses its schedule or a port call is skipped. Does the shipper get a rate credit, the option to cancel, or rerouting at carrier expense? Leaving this blank invites disputes when disruption occurs. The episode details how shippers should separate rate risk from service risk in their negotiations.
Allocation and priority treatment matter when capacity shrinks. If a carrier reduces sailing frequency, does your shipper get priority, or are you cut proportionally? Which shippers get space first? The contract must define the allocation method.
Cargo in transit rules prevent disputes when disruptions occur mid-voyage. If a container is stranded at sea due to a cancelled call or port closure, who bears the holding cost? When does liability for delay begin? These edge cases emerge only in disruption—and they are the hardest to resolve without advance clarity.
Effective Capacity vs. Total Fleet Size: The ocean freight market now operates under a distinction that reshapes pricing. The global container ship order book represents roughly 37% of the existing fleet, yet approximately 11% of global container ship capacity waits outside ports at any moment—idle due to congestion, not lack of demand. Effective capacity is what actually moves cargo on time; total capacity means nothing if vessels cannot reach docks reliably. Contracts written without this distinction will misalign shipper expectations with carrier reality. One stark detail from the market: the episode explores how even the largest carriers are actively managing supply down —withdrawing capacity as a deliberate capacity management tool rather than a temporary fix.
"Reliability is not just a service metric. It is capacity."
FreightFlow Advisor Team — The insight that redefined how modern freight contracts must be negotiated. When vessels skip ports and alternative routes stretch timelines, reliability becomes the scarcest resource, not equipment availability.
Contracts must cover seven specific areas: routing, surcharges, notice periods, force majeure, service failures, allocation, and in-transit cargo handling.
Geopolitical disruption and port congestion are now structural constraints, not temporary shocks—contracts must reflect this reality.
Carriers have withdrawn 10–14% of scheduled capacity in 2026, making explicit allocation and priority clauses essential.
Effective capacity (cargo that actually moves on time) is now more important to shipper planning than total fleet size.
Contract rate volatility has reached parity with spot market swings, requiring explicit escalation and amendment triggers.
How should freight operators evaluate carrier and forwarder performance beyond rate negotiations?
Freight operators must separate rate risk from service risk by evaluating actual schedule performance, port skip contingencies, empty equipment sourcing, fallback gateway options, and surcharge governance —not just contract rates. Missing sailings, late transshipments, poor equipment cycles, and delayed inland handoffs can cost more than rate increases and are far harder to detect in time.
The Hidden Cost of Service Failure
When a vessel skips a port or a transshipment runs late, the cost compounds across your entire supply chain. Yet these failures often go unmeasured because shippers focus primarily on the negotiated rate. An equipment cycle that stretches longer than planned or an inland handoff that misses your window can disrupt production schedules and tie up working capital in ways that a 5% or 10% rate increase never would.
This is where the FreightFlow Advisor team explains the real problem : operators focus their contracts on the variables they can negotiate—price—and ignore the variables that actually move the needle on total cost of service. The result is that a carrier or forwarder can deliver rate concessions while quietly degrading reliability in ways your negotiating team never sees until it's too late.
What to Ask Your Carriers and Forwarders
Begin with schedule integrity. Ask what percentage of sailings actually depart as published in the last 12 months, and what happens when a vessel skips your port—is there a guaranteed next sailing, or do you fall into a spot market auction? That transparency matters more than the rate card.
Then move to operational details: Where do empty containers come from? If a forwarder sources empties from the wrong location, your pickup window can collapse and your cost per shipment jumps. Ask about fallback gateways—if your primary port is congested, can cargo move through an alternative at no surcharge, or is that reroute passed directly to you?
Finally, pin down surcharge governance. How are fuel surcharges, port congestion fees, and equipment imbalance charges calculated? Are they transparent and predictable, or do they appear as line items after the shipment lands? Vague surcharge language is where carriers hide cost leakage, and this episode covers exactly how to structure these questions in a way that protects your margin.
"Reliability is not just a service metric. It is capacity."
FreightFlow Advisor Team — Market Intelligence Analysts at FreightFlow Advisor, specializing in ocean freight market dynamics and the hidden costs of service degradation in container shipping.
That statement cuts to the heart of why rate-only negotiation fails. When a carrier pulls back on scheduled sailings or extends equipment cycles, they are directly reducing your effective capacity. You end up paying more per unit of cargo moved, even if the headline rate is lower. A carrier managing capacity through reliability degradation is effectively raising your price in disguise.
To understand the broader context behind these performance metrics, listen to the full episode on Listenly , where the market drivers behind carrier behavior are explained in detail.
What recent rate movements signal that pressure is shifting from spot markets to contract rates?
Long-term contract rates on Asia-to-U.S. routes jumped 40-41% while spot rates rose only 6% , signaling that carriers now believe supply disruptions are durable enough to reprice longer-term commitments. This rate divergence marks a fundamental shift from the traditional pattern where spot rates move first while contract rates lag.
Spot rates move quickly, responding to immediate demand, available vessel space, and port conditions. Contract rates, by contrast, are meant to provide stability—a shipper commits volume and a carrier commits capacity over a defined period. Typically, spot rates fluctuate first while contract rates follow slowly or lag significantly behind. The current market is breaking this pattern , as detailed in The FreightFA Brief Podcast .
The divergence signals carrier confidence in sustained disruption
When carriers reprice long-term contracts upward by 40 percent or more, they are making a explicit bet that current supply constraints will persist. According to data from Lodestar, Asia to Los Angeles spot rates rose 6% to $6,244 per 40-foot container—a meaningful increase on its own, but dwarfed by the average long-term rate movements: 41% on Asia to U.S. West Coast trades and 40% on Asia to U.S. East Coast trades .
This repricing reflects carriers' assessment that the traditional economic forces driving freight markets have shifted. Rather than the conventional assumption that "more ships mean cheaper freight," the market is now pricing in the reality that effective capacity remains constrained by congestion and geopolitical disruption , not by the absolute number of vessels in the global fleet.
For shippers locked into spot market purchases, this divergence creates urgency. The episode explores how carriers are managing capacity strategically to maintain pricing power even as new vessel orders swell the future fleet. The lag between spot and contract rate movements, once a buffer that gave shippers time to assess market direction, is narrowing—and carriers are signaling they do not expect relief soon.
Long-term contract rates on Asia-U.S. routes jumped 40-41% versus only a 6% spot rate increase, reversing the typical lag.
Carriers are repricing based on the belief that supply disruptions—congestion, geopolitical constraints, capacity withdrawal—will persist.
The effective capacity constraint is not the order book size but how many ships are operationally available on the right trade lanes at the right time.
Shippers face shrinking windows to lock in rates before carriers implement the next round of contract repricing.
To what extent are carriers reducing scheduled capacity across major east-west trade lanes?
Carriers withdrew 10 to 14 percent of scheduled capacity across four major east-west trade lanes in the first half of 2026. Asia to U.S. East Coast experienced the steepest cut at 14 percent, while Asia to U.S. West Coast and Asia to North Europe each saw 11 percent withdrawals, and Asia to Mediterranean declined by 10 percent.
Capacity Management in a Congested Market
This capacity withdrawal is not simply a response to weak demand. Instead, it reflects a deliberate strategy by carriers to align scheduled capacity with what they can reliably operate given persistent port congestion and geopolitical disruptions. When ships spend extra time waiting at congested ports or rerouting around blocked passages like the Red Sea, fewer vessels become available for scheduled rotations—even though the total fleet size continues to grow.
The data from Lodestar, as discussed in the episode , shows the gap between installed capacity and effective capacity widening. According to the same analysis, approximately 11 percent of global container ship capacity was waiting outside ports , further shrinking the pool of ships available to move cargo on schedule.
This dynamic explains why Asia to U.S. East Coast—the trade lane most exposed to Red Sea diversions around the Cape of Good Hope—saw the largest withdrawal. Vessels need more calendar days to complete each rotation when they take the longer route, which compresses the number of round trips a ship can make in a given period. Carriers respond by reducing their published schedule rather than promising reliability they cannot keep.
Why Carriers Are Pulling Scheduled Capacity, Not Just Pricing
Capacity withdrawal signals something deeper than spot market volatility. While Asia to Los Angeles spot rates rose just 6 percent to $6,244 per 40-foot container , average long-term contract rates surged 41 percent on Asia to U.S. West Coast and 40 percent on Asia to U.S. East Coast in the same period. The contrast is striking: carriers are not waiting for spot rates to justify rate increases; they are actively reducing the amount of space they publish on contracts.
As explained in this episode , the market is no longer governed by the simple equation "more ships equals lower freight rates." Instead, effective capacity—the number of vessels actually available to move cargo reliably on the right trade lane —has become the operative constraint. Congestion, diversions, and schedule unreliability have made the carrier's published schedule a scarce resource.
The message to shippers is clear: pulling capacity off the market is carriers' way of managing risk and protecting their own schedule reliability. Rather than overselling capacity they cannot deliver, carriers are shrinking their commitments upfront, which gives them better odds of meeting their published itineraries and negotiating rate increases in contract renewals.
Effective capacity is not the same as installed capacity. It is the number of vessels that are actually available, positioned correctly, and reliable enough to move cargo on schedule on a specific trade lane. When ships wait at congested ports, are rerouted around geopolitical disruptions, or suffer schedule delays, effective capacity shrinks even as the global fleet grows. This distinction is why the episode emphasizes that "reliability is not just a service metric—it is capacity."
How have Red Sea diversions impacted vessel availability and service frequency?
Since late 2023, rerouting around the Red Sea via the Cape of Good Hope has extended Asia-Europe voyage times significantly , forcing carriers to deploy more ships to maintain the same weekly service frequency. Each voyage absorbs more vessel days, reducing the effective capacity available across the trade lane.
When a single rotation takes longer—adding time, fuel consumption, and operational complexity—the mathematics of capacity shift fundamentally. A carrier that previously cycled a ship through eight rotations per year now completes only six or seven. To sustain a weekly service commitment with fewer annual rotations per vessel, they must add ships to the fleet rotation, even if the total global fleet size remains unchanged.
This dynamic reveals why the FreightFlow Advisor team explains in their episode that installed capacity—the number of ships that exist—differs fundamentally from usable capacity. A ship delayed by port congestion, rerouted by geopolitical disruption, or waiting outside a bottlenecked terminal is unavailable for its next scheduled sailing. That gap between theoretical and practical capacity is where rate pressure now emerges.
The impact cascades across contract rates. According to data discussed on the podcast , long-term contract rates on Asia to U.S. West Coast and East Coast lanes climbed 41% and 40% respectively in the first half of 2026—far outpacing the 6% spot rate movement to $6,244 per 40-foot container. This divergence signals that carriers are tightening their capacity commitments, not loosening them, despite an order book representing approximately 37% of the existing global fleet.
Effective capacity: The portion of available ships actively sailing and meeting service schedules on a given trade lane, distinguished from installed capacity (total ships in existence). Effective capacity shrinks when vessels are delayed at ports, rerouted around geopolitical hotspots, or held in reserve as carriers manage demand strategically.
The Red Sea rerouting also coincides with carriers actively withdrawing scheduled capacity across major east-west trades. This strategic withdrawal, explored in detail on the podcast , reflects how carriers are managing supply tighter than supply-side metrics suggest they should—a signal that the bottleneck is not ship availability in absolute terms, but how many ships can reliably reach destination on time.
Why diversion costs translate into tighter capacity discipline
Extended voyage times impose real costs: additional fuel consumption, crew scheduling complexity, and delayed asset turnover all accumulate. A ship that spends an extra 10 to 14 days at sea per rotation absorbs that time cost across the entire annual schedule. Carriers respond by either adding ships to preserve service promises or tightening schedules and reducing frequency—often both, depending on market conditions and shipper negotiating power.
The result is that available capacity on critical lanes becomes the scarcer resource , not the global fleet size. When approximately 11% of global container capacity is waiting outside ports due to congestion alone, and rerouting decisions remove additional vessels from scheduled rotations, the cumulative impact on Asia-Europe and Asia-North America services becomes acute. Shippers expecting cheaper rates simply because new ships enter the global fleet are misreading the constraint.
What percentage of global container shipping capacity was constrained by port waiting times?
Roughly 11% of global container ship capacity was waiting outside ports , unable to load or discharge cargo. This bottleneck doesn't simply slow individual shipments—it cascades through the entire freight network, reducing the effective capacity available to shippers across all trade lanes and creating persistent delays that ripple far beyond the congested port itself.
Port congestion represents a structural constraint that most shippers underestimate. Ships sitting idle at anchor or in waiting zones are not available for their next voyage, and this idle time compounds across the network. According to the FreightFlow Advisor analysis , this congestion problem is especially acute in North Europe, where vessel arrival-to-berth times remain significantly elevated compared to pre-pandemic levels.
The practical implication is immediate: installed capacity—the number of ships in the global fleet—bears little relation to usable capacity. A vessel waiting three weeks for a berth slot is, for that period, offline. When carriers simultaneously withdraw 10-14% of scheduled capacity across major east-west trade lanes (reaching 14% on Asia-U.S. East Coast routes), the compounding effect is severe. Container shipping operates as a tightly connected system where delays at one port ripple throughout the entire freight network, affecting shippers across routes that should have no direct relationship to the congested port.
Schedule reliability, a metric measuring whether carriers meet their published arrival and departure times, remains well below pre-pandemic benchmarks across all major routes. This unreliability itself becomes a capacity constraint. The episode explores how reliability is not just a service metric—it is capacity . When shippers cannot rely on a vessel to arrive on time, they must plan for longer lead times and buffer stock, effectively reducing the usable capacity of the network.
Why installed capacity is not the same as available capacity
The distinction between total ship capacity and effective capacity has become central to understanding modern container shipping. Even with a record global order book representing approximately 37% of the existing fleet under construction, the market is not behaving as the simple logic would predict: more ships should mean lower rates. Yet rates have continued to rise in both spot and contract markets.
The reason is explored in depth in The FreightFA Brief : effective capacity is constrained by congestion, geopolitical disruption, and carrier capacity management. Vessels rerouted around the Red Sea and Strait of Hormuz add weeks to transit times and reduce available capacity on major east-west routes. Ships caught in port congestion are equally unavailable. This convergence—congestion, geopolitical rerouting, and deliberate carrier capacity withdrawal—creates the "recipe" that explains why the freight market behaves differently from simple supply-and-demand theory.
"Reliability is not just a service metric. It is capacity."
FreightFlow Advisor Team — Market Intelligence Analysts at FreightFlow Advisor, specializing in supply chain volatility and freight market dynamics.
The 11% idle capacity figure is not an abstract statistic; it translates directly into higher contract rates and longer booking windows. When Asia-U.S. West Coast long-term rates jumped 41% and East Coast rates climbed 40%, while spot rates on Asia-Los Angeles routes rose 6% to $6,244 per 40-foot container, shippers faced a market where neither spot flexibility nor long-term commitments offered relief. This dynamic is detailed in the full episode , which also covers carrier decisions and the broader shifts in ocean freight operating models.
11% of global container ship capacity was constrained by waiting times at congested ports, rendering these vessels temporarily unavailable for subsequent voyages.
Carriers withdrew 10-14% of scheduled capacity across major east-west trade lanes in the first half of 2026, compounding congestion-driven unavailability.
Schedule reliability remains substantially below pre-pandemic levels, forcing shippers to plan longer lead times and reducing effective network capacity.
Port congestion, geopolitical rerouting, and deliberate carrier capacity management combine to make installed fleet capacity a poor predictor of actual freight availability or pricing.
Why does a large global container fleet not guarantee available capacity on critical trade lanes?
Installed capacity is not the same as usable capacity. Ships waiting at congested ports become unavailable for the next voyage , vessels rerouted around the Cape of Good Hope take longer to complete rotations, and geopolitically disrupted ships cannot reposition containers or return to normal schedules. Blank sailings marketed to customers may never actually arrive, creating acute scarcity despite record fleet size.
The Congestion and Rerouting Trap
Port congestion is not a temporary bottleneck—it actively removes vessels from productive service. When a container ship waits outside a congested port, it cannot start its next rotation on schedule. That delay cascades across the entire trade lane, effectively shrinking usable capacity even though the vessel still exists on paper.
Geopolitical disruptions have created a secondary availability problem. Vessels forced to reroute through the Cape of Good Hope instead of the Suez Canal add 10–14 days to their voyage time, reducing the number of completed rotations per year. Fewer rotations mean fewer slot opportunities for shippers, regardless of the global fleet size. A ship locked out of normal geography is a ship that cannot serve the market reliably.
Carrier Capacity Management and Blank Sailings
Carriers have actively withdrawn scheduled capacity across major east-west trades. In the first half of 2026, carriers withdrew 10–14% of scheduled capacity on Asia-to-U.S. and Asia-to-Europe lanes. This is a deliberate choice to support rate stability, not a result of ships being unavailable.
The market impact is immediate and contradictory to traditional logic. As the FreightFlow Advisor team explains in the episode , this supply-side discipline means that even when spot rates should fall under a growing fleet, contract rates—which commit long-term capacity—move up instead. Asia to U.S. West Coast contract rates rose 41%, and Asia to U.S. East Coast rates rose 40%, signaling that shippers cannot access the capacity they believe should exist.
Why Reliability Has Become Capacity
The underlying truth is that reliability is not just a service metric—it is capacity . A shipper needs a container to arrive when promised. When 11% of the global container fleet is waiting outside ports and another segment is stuck in longer reroutes, the effective capacity available to the market contracts sharply. The order book shows approximately 37% of the existing global fleet on order, yet that future supply cannot offset current unavailability.
Discussed at length in this podcast , the disconnect between fleet size and actual capacity explains why rate pressure is now moving from spot contracts into long-term agreements. Shippers are willing to pay higher contract rates precisely because they cannot rely on the spot market to deliver reliable service at peak times. Blank sailings—scheduled capacity that carriers may withdraw—become a form of hidden scarcity, even when the fleet is historically large.
"Reliability is not just a service metric. It is capacity."
FreightFlow Advisor Team — Market intelligence analysts specializing in freight cost, capacity, service, and supply-chain decision-making across shipping, trucking, and parcel operations. Their analysis focuses on the gap between headline fleet data and the operational constraints that actually determine shipper access to container space.
The Man Who Finds Hidden Freight Costs | Oliver Nodjoumi ICC Logistics
What is the most widely overestimated need in modern parcel shipping strategy?
Express shipping is widely overused when ground shipping delivers comparable service at a fraction of the cost. Most companies default to express delivery based on Amazon-driven customer expectations, but modeling different scenarios reveals that ground shipping often meets actual delivery requirements while cutting expenses significantly. This shift requires supply chain redesign, but the cost-benefit analysis almost always favors the switch.
The default assumption in modern logistics is that faster delivery wins customers. But this episode reveals that speed is often purchased at a premium when it isn't actually required by the business.
The challenge lies in unexamined assumptions. When a company has always shipped express, there's rarely a moment to question whether the service level aligns with real customer needs. CFOs see shipping as a fixed cost category, not as a variable with built-in margin leakage.
Rethinking Service Level Design vs. Speed Reflexes
Ground shipping and express shipping often arrive within the same timeframe for many parcel movements, especially during non-peak periods. The real gap is between what carriers can deliver and what companies actually communicate to customers. If a customer expects a shipment in 5 business days, express overnight service adds cost with no perceived value gain.
As Oliver Najumi explains in the podcast , the forensic audit of shipping operations reveals that companies often move 30% or more of their volume to alternative carriers or lower service tiers without degrading customer satisfaction. The cost savings on that volume can reach 50% annually.
One example: a $5 million UPS shipper customer saved $1.6 million annually by moving just 30% of low-weight volume to an alternative carrier . That's a 50% reduction on that segment—without touching the premium express shipments that truly require speed.
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President, ICC Logistics. Since April 2014, Najumi has partnered with CFOs and supply chain leaders to audit freight operations with the rigor typically reserved for financial controls. At ICC Logistics, a firm that has operated for nearly 50 years as an impartial extension of logistics teams, he applies data-driven auditing to uncover cost leakage across rates, service execution, and supply chain design itself.
Implementing this strategy isn't a simple rate negotiation. The full episode explores the deeper mechanics of how routing logic, network design, and carrier selection work together. Switching from express to ground requires modeling—run scenarios for your actual customer delivery windows and compare them to what you're currently spending.
The operational payoff compounds over time. Every dollar saved on unnecessary express shipping flows directly to margin , especially at scale. A furniture retailer paying 47% of their annual $400,000 shipping budget just on accessorial charges discovered similar opportunities—not through better rates, but through re-engineering which shipments actually need which service levels.
What is the most universally understandable key performance indicator for freight cost management that CFOs can digest without daily shipping expertise?
Cost per pound, aligned with freight classification and service level , is the metric that C-level executives consistently understand without needing daily shipping expertise. Whether managing one carrier or 22 carriers across multiple modes, this measure delivers clarity—like two plus two equals four.
The challenge CFOs face when reviewing freight operations is that shipping metrics can feel opaque. Accessorials, surcharges, dimensional pricing, and carrier-specific rules pile up in ways that obscure the actual cost structure. Without simplification, a CFO reviewing a shipping bill sees a jumble of line items rather than a clear cost signal.
As Oliver Najumi explains in the episode , the power of cost per pound lies in its universality. When you anchor that metric to the freight classification and service level actually assigned to each shipment, you create a normalized benchmark. A CEO reviewing a report with cost-per-pound trending up or down immediately grasps whether margin is being protected or eroded.
Why other metrics fall short for executive audiences
Other KPIs may shine in specialized contexts—on-time delivery for service quality, dimensional factor for packaging efficiency, or accessorial spend concentration for operational risk. But when the goal is to present data to an executive who does not live shipping daily, simplicity and defensibility matter more than precision . Cost per pound passes both tests because it reflects actual business economics: the shipper pays by weight (or dimension, when applicable), and executives understand cost per unit.
The moment a CFO has to ask, "What does this number mean in real business terms?"—you've lost clarity. Cost per pound requires no translation. It bridges the gap between logistics expertise and financial accountability, which is why a point detailed in this podcast is that ICC Logistics, despite processing roughly $9 billion per year of shipping cost transactional data, consistently returns to this single metric when communicating with C-level clients.
The practical application: consistency across carrier and mode diversity
One of the subtle strengths of cost per pound is that it normalizes across carrier diversification. A shipper running volume through UPS, FedEx, USPS, and regional carriers can track cost per pound for each lane and carrier combination, then overlay service level and freight classification to benchmark competitive performance. This consistency allows apples-to-apples comparison regardless of how fragmented the carrier portfolio becomes.
When a logistics leader is brought in to protect freight margin, the foundation of their audit often begins by establishing a baseline cost per pound for each service profile, then auditing actual invoices against that baseline. If an invoice arrives with unexpected charges, the cost per pound for that shipment jumps—and the spike becomes immediately visible to executives. Discussed at length in this conversation , this approach has proven effective even for companies managing complex, multi-modal supply chains.
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President, ICC Logistics. Oliver has served in this role since April 2014 and works directly with CFOs and supply chain leaders to audit and optimize transportation operations. He brings a data-driven mindset to freight management and leverages ICC's nearly 50-year institutional expertise—the firm was founded in 1975 by Tony Muzio, a former traffic manager who recognized the need for impartial logistics auditing and optimization.
What makes cost per pound even more powerful is that it scales naturally into operational drill-downs. A CFO sees a trend line; a supply chain analyst can then segment that metric by geography, customer, product type, or carrier to isolate where margin is leaking. The simplicity at the top does not sacrifice depth below.
How can AI tools assist in freight contract review and invoice auditing while avoiding common pitfalls?
AI is strong at anomaly detection in data warehouses when trained correctly with proper mathematical boundaries, reading contract and service guide language…
When does carrier diversification beyond a primary carrier like UPS actually create financial leverage versus added operational complexity?
Carrier diversification creates leverage by reducing single-carrier dependency and protecting against catastrophic disruptions like cyber attacks or air disasters. One shipper spending $5 million with UPS saved $1.6 million annually—a 50% reduction—by moving just 30% of low-weight shipment volume to an alternative carrier offering 33% better rates.
The Financial Case: Real Numbers from the Field
The math becomes compelling at scale. A company heavily concentrated with one carrier faces exposure on two fronts: negotiating leverage evaporates when a carrier knows you have nowhere else to go, and operational risk skyrockets if that single network fails. As Oliver Najumi explains in the episode , moving even a modest portion of volume to a tested alternative immediately shifts the power dynamic in rate negotiations with your primary carrier.
The $5 million UPS example is not an outlier. In this case, 30% of volume—specifically low-weight shipments that command higher per-unit margins from UPS—was redirected to an alternative carrier. The result was not just the 33% savings from the new carrier; the primary carrier, facing the threat of losing that business, also became more willing to compete. The combined effect: $1.6 million in annual savings, or 50% of the original UPS spend for the diverted portion.
This works because low-weight shipments are the margin sink for traditional carriers. UPS and FedEx optimize for their own network, not for your bottom line. When you remove that unprofitable-for-you volume to a specialized or regional carrier, you stop subsidizing their inefficiency and start capturing the spread.
When Complexity Becomes a False Worry
Many CFOs and supply chain leaders balk at diversification, citing integration complexity, billing fragmentation, and operational overhead. The fear is real—but often overstated. A point detailed in this podcast is that the risk is manageable if you approach it methodically rather than attempting a sudden wholesale shift.
The tested approach: start with a small pilot allocation —perhaps 5-10% of targeted volume—to a secondary carrier. Use this phase to validate three critical elements: billing accuracy, system integration with your TMS or ERP, and service quality consistency. Most integration issues surface immediately and prove minor: API connectivity, rate sheet formatting, or shipper account setup.
Once the small tranche runs cleanly for 30-60 days, you increase the allocation incrementally. This removes the binary risk: you are not betting the entire operation on a new partner. You remain free to adjust course, pull back, or add additional carriers if the data shows it makes sense. Operational complexity becomes a managed variable, not a blocker.
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President, ICC Logistics. With more than a decade at ICC since April 2014, Najumi works directly with CFOs and supply chain leaders to uncover hidden cost and service gaps through data-driven freight auditing. He describes himself as a data-first practitioner leveraging ICC's 50-year legacy as an impartial extension of logistics teams, a role founded by Tony Muzio in 1975 to solve the very cost-control challenges that remain unsolved in most supply chains today.
The deeper reason diversification works is psychological as much as operational. When a shipper has proven they will move volume elsewhere, carrier behavior shifts immediately . Rate cards become more flexible, service commitments more concrete, and exceptions more readily granted. The carrier no longer treats you as a captive customer; they treat you as a partner worth keeping.
Discussed at length in the full episode is how this leverage advantage compounds over time. Year one savings pay for the integration effort. By year two, the competitive pressure you have created keeps margins intact, and you have the optionality to add a third or fourth carrier if that carrier's pricing or service slips. You are no longer trapped.
The Implementation Blueprint
Pilot phase: Start small and measure. Allocate 5-10% of volume to a secondary carrier—ideally one that specializes in your shipment profile (weight, geography, speed). Validate billing, check for hidden accessorials, confirm on-time performance against SLA, and ensure your systems talk cleanly.
Validation phase: Run for 30-60 days. Collect data on actual costs, service metrics, and system issues. Involve your finance, operations, and IT teams to surface any friction. Most problems are solvable and small.
Scale phase: Increase allocation step by step. If the pilot succeeds, move to 15-20%, then 30%, then beyond. Each step is a natural checkpoint to pause, assess, or pivot. You remain in control of pace and risk.
Leverage phase: Renegotiate with your primary carrier. Once secondary volume is live and performing, return to your primary carrier with real data showing a credible alternative. Rate improvements often follow quickly.
What specific process should a logistics leader follow when brought in to protect freight margin over a 90-day period?
The process begins by pulling the trailing 12 months of shipment data to map the shipper's actual profile and cost exposures. Next, organize internal routing principles to understand how the full provider portfolio is executed, then run this data against a data warehouse containing roughly $9 billion annually in shipping transactional data to identify what rates are truly competitive. The result is not a fixed budget, but a moving-target budget that adjusts as market conditions shift —protecting margin in real time rather than against an outdated projection.
Building the Foundation: Data, Routing, and Competitive Intelligence
The first step is forensic: collect a full 12 months of trailing data from the shipper's own transactions. This isn't a rough estimate or a category average—it's the real shipment history, including origin, destination, weight, dimensions, service level, and actual costs paid. Without this foundation, any margin protection strategy is built on guesswork.
Once you have the data, the second layer is internal routing analysis. Understanding how the organization currently executes its logistics—which carriers handle which lanes, what service commitments exist, where redundancy sits—reveals the true operational picture. As Oliver Najumi explains in the episode , this is where you discover whether the portfolio of logistics providers is being deployed logically or reactively.
The third and most decisive step is benchmarking against reality. Running the shipper's actual data against a data warehouse containing roughly $9 billion per year of shipping cost transactional data reveals exactly what is competitive in the market today and what is not. This isn't theoretical pricing—it's what real shippers actually pay in real transactions across carriers, lanes, and service types.
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President at ICC Logistics. Since joining ICC in April 2014, Najumi has worked closely with CFOs and supply chain leaders to deliver freight auditing and optimization results. He describes himself as a data guy who leverages ICC's nearly 50-year track record as an impartial extension of logistics teams, auditing freight with the rigor of a forensic investigation. Founded in 1975 by Tony Muzio, a former traffic manager frustrated with logistics inefficiency, ICC has built its reputation on treating every shipment, every contract, and every cost as a testable fact, not an assumption.
Why a Moving-Target Budget Protects Margin Better Than a Fixed One
Here's the critical insight: a fixed budget becomes obsolete within weeks. Market conditions—carrier capacity, fuel surcharges, peak season premiums, accessorial inflation—shift constantly. A static number locked in at the start of the 90-day window has no chance of staying accurate.
Instead, a moving-target budget adjusts as market data updates . It's recalibrated against the live $9 billion transactional database, so if carrier rates drop or surge, the expected cost is adjusted in real time. This keeps the margin protection strategy adaptive, not reactive. You're not scrambling three months in to find $500,000 of unexpected costs; you're already pricing them in.
This entire diagnostic and strategy-building process—pulling data, organizing routing, running competitive analysis, and building the moving budget—takes about two weeks. The result is a realistic, data-backed plan that actually holds up when executed, not an idealistic scenario disconnected from market pricing.
For a deeper look at how accessorial charges amplify exposure during this period, explore what accessorials really are and how they can turn a manageable shipment into a massive cost spike .
Pull 12 months of actual trailing data to map the shipper's real shipment profile and cost exposures—not averages or estimates.
Organize internal routing principles to understand how the current provider portfolio is being executed and where inefficiencies exist.
Benchmark against a data warehouse with ~$9 billion annually in real shipping transactional data to identify true market competitiveness.
Build a moving-target budget that adjusts as market conditions change, not a fixed budget that becomes outdated within weeks.
This entire process takes roughly two weeks and creates a realistic, defensible margin protection strategy.
How should CFOs distinguish between legitimate cost increases and billing leakage in freight expenses?
Legitimate cost increases—such as correctly billed tariffs and carrier rate hikes—are not leakage; they are simply higher costs to do business. Real leakage appears as missed billings, improperly applied charges, and inefficient routing , often disguised when multiple cost pressures hit simultaneously. CFOs must audit shipment profiles, routing efficiency, and actual carrier pricing to identify where leakage truly occurs.
The core confusion stems from timing. When tariffs rise, inflation climbs, and carrier prices increase all at once, CFOs face a perfect storm that masks billing errors. A 15% increase in freight costs might appear inevitable—when in reality, half of that could be undetected leakage.
Leakage takes specific forms. Warehouses that fail to measure and weigh items correctly cause shippers to be billed at higher rates than what appears on the manifest. As Oliver Najumi explains in the episode , this is where forensic-level auditing becomes essential. Incorrect dimensional weight classifications, missing surcharges that should have been applied to the bill (but weren't), and suboptimal routing all create cost leakage that compounds over time.
The three hidden sources of leakage
Missed billings occur when carriers fail to charge for services rendered—a benefit in the short term, but often a sign that your billing data is unreliable. More commonly, improperly applied charges show up when accessorial surcharges are applied inconsistently or when dimensional weight thresholds change without your routing strategy adjusting. Inefficient routing happens when shippers don't diversify carriers or don't consolidate shipments when it makes economic sense.
A practical example: if one customer's accessorial costs jumped $200,000 annually when weight and dimension thresholds changed, that shift alone can mask deeper issues in how shipments are being classified. The episode details how ICC Logistics processes roughly $9 billion per year of shipping cost transactional data , allowing them to spot patterns that individual shippers cannot detect alone.
The real risk emerges when you accept blanket cost increases without questioning their composition. If inflation is 3% but shipping jumps 15%, the difference isn't all legitimate—some portion is leakage buried in tariff confusion, billing errors, and miscalculation.
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President, ICC Logistics. Najumi has led ICC Logistics' freight auditing practice since April 2014, working directly with CFOs and supply chain leaders to uncover hidden costs and optimization opportunities. He describes himself as a data-driven professional who leverages ICC's nearly 50-year track record of acting as an impartial extension of logistics teams, forensically auditing everything from service levels to rate competitiveness and supply chain execution efficiency.
One striking detail from the episode: Oliver Najumi shares how a $5 million UPS shipper customer saved $1.6 million annually—a 50% reduction—by moving just 30% of low-weight volume to an alternative carrier , revealing just how much leakage can hide in carrier concentration and suboptimal routing decisions.
How to audit your way to clarity
The auditing process starts with your data. Pull a representative sample of shipments over the past three months and cross-reference manifest weights against billed weights. Any gap signals either data quality issues or billing errors —both forms of leakage that compound monthly.
Next, analyze your routing strategy. Are all your small packages going through one carrier? Are you consolidating shipments efficiently? A simple carrier diversification test—moving 10–20% of volume to an alternative carrier and comparing rates—often reveals that your primary carrier's pricing has drifted upward without justification.
Finally, validate your accessorial charges. Review the last 12 months of invoices and categorize every surcharge: dimensional weight, oversized, hazmat, residential delivery, Saturday delivery, and so on. The podcast details how one furniture customer discovered that 47% of their $400,000 annual shipping spend came from accessorial charges alone —a red flag that routing and dimensional strategy needed urgent revision.
What are accessorial charges and how dramatically can they impact total shipping costs?
Accessorial charges are surcharges layered onto freight costs for dimensions, weight, handling, and other special conditions. These fees can easily represent 47% of a company's total shipping spend —and they shift quietly, with one retailer facing a sudden $200,000 annual cost jump when weight and dimension thresholds changed overnight.
From $9 to $58.75: How a Single Surcharge Can Spiral
One furniture company's experience illustrates the scale of the problem. An accessorial charge for items over 48 inches or exceeding 40 pounds started at $9 in 2015. By 2024, that same charge had climbed to $58.75— a 582% increase over 11 years . This wasn't driven by inflation, which over the same period rose far more modestly. The charge compounded silently across thousands of shipments, invisible to many finance teams still budgeting off last year's baseline.
What makes accessorials particularly dangerous is that they're not negotiated upfront like base rates. As Oliver Najumi explains in the episode , carriers adjust these thresholds and fees with minimal transparency. When a 48-inch length limit suddenly becomes 42 inches, or when weight bands shift, exposure multiplies across entire SKU portfolios—sometimes overnight.
Why Accessorials Matter More Than the Headline Rate
Most CFOs benchmark shipping against inflation rates or carrier base-rate increases. That's a critical mistake. Accessorial fees often dwarf headline rate changes in their total impact. For the furniture customer mentioned above, nearly half of the $400,000 annual budget came from these surcharges alone, not from the stated freight rate.
The reason accessorials fly under the radar is structural: they're embedded in invoices, scattered across dozens of charge codes (dimensional weight, fuel, residential delivery, handling, etc.), and tracked loosely by most shippers. Carriers know this, and they've learned to quietly nudge thresholds year after year. A point detailed in this podcast episode is that this pattern repeats across USPS, UPS, FedEx, and LTL carriers—each maintaining their own matrix of fees that shift with little advance warning.
Accessorial Charges Defined
Accessorials are supplemental fees added to base freight charges. Common examples include dimensional weight surcharges (for oversized items), fuel surcharges, peak season premiums, residential delivery fees, and hazmat handling charges. They are applied on top of the base shipping rate and can vary significantly by carrier and service level.
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President, ICC Logistics. Since April 2014, Najumi has worked closely with CFOs and supply chain leaders to audit and optimize freight spending. As a self-described data guy, he leverages ICC Logistics' nearly 50-year history (founded 1975) of acting as an impartial extension of logistics teams, delivering results that withstand scrutiny across service levels, rates, and supply chain efficiency.
To uncover how tariff misclassifications amplify costs further, see how companies validate tariff classifications to avoid unnecessary cost penalties . Understanding both accessorials and tariff risk together gives a complete picture of hidden freight exposure.
Accessorial charges can represent up to 47% of annual shipping spend, dwarfing base rate increases.
A single accessorial charge increased 582% in 11 years (from $9 to $58.75), far outpacing inflation.
Threshold shifts (dimension, weight, service area) can trigger sudden $100,000+ annual cost jumps with no advance notice.
Freight auditing and threshold monitoring are essential to catching these changes before they cascade across your entire shipment volume.
How can companies validate tariff classifications to avoid unnecessary cost penalties?
Companies must ensure their HTS codes are accurate and all shipping descriptions and labeling are correct , since incorrect tariff information directly increases costs and customs penalties. As part of due diligence, auditing confirms proper billing and validates classification codes between customers and brokers. Examining importer of record responsibilities and evaluating whether INCO term changes could shift tariff obligations are also critical validation steps.
Tariff validation begins with the fundamentals: verifying that your HTS (Harmonized Tariff Schedule) codes match your actual product descriptions . When shipping documentation fails to reflect accurate classifications, carriers and customs authorities can assess higher duties, and companies face unexpected cost spikes or formal penalties.
The most common source of tariff leakage, according to ICC Logistics auditing work, is poor communication between customers and freight brokers. When classification codes are not communicated correctly or consistently, tariffs either climb or trigger compliance issues at the port of entry. This is where Oliver Najumi emphasizes the importance of forensic auditing —treating each shipment's documentation as a legal and financial checkpoint.
Four pillars of tariff validation
Accurate HTS code assignment is the first line of defense. Every product category carries specific duty rates, and misclassification—even by a single digit—can land you in a higher tax bracket. Your team or broker must verify codes against current tariff schedules before any shipment leaves your warehouse.
Complete and truthful labeling and descriptions form the second pillar. Customs officers cross-reference your shipping labels with declared values and product details. Vague, incomplete, or misleading descriptions invite audits and penalties. As part of this, ensure that weights, dimensions, and material composition are stated exactly as they appear on official documentation.
The third pillar involves reviewing importer of record (IOR) responsibilities . Depending on your trade terms and who bears liability, tariff obligations can shift. If you have not formally assigned IOR status, you may be unknowingly liable for duties you assumed the buyer would cover. A conversation with your legal and customs compliance team can clarify where that responsibility truly lies.
Finally, INCO term selection directly affects tariff exposure . Terms like FOB, CIF, and DDP determine who pays duties and when. Switching from one term to another—say, from FOB (buyer pays) to DDP (seller covers all costs)—can fundamentally alter your tariff liability. This is not always a cost-saving move, but it is a critical variable to audit and test.
As detailed in this episode of The FreightFA Brief Podcast , ICC Logistics regularly uncovers substantial tariff overages simply by validating code accuracy and bridging communication gaps between shippers and customs brokers—sometimes recovering tens of thousands of dollars per customer annually.
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President, ICC Logistics. Najumi has led freight auditing and logistics optimization since 2014 at ICC Logistics, a firm founded in 1975 by Tony Muzio to act as an impartial extension of logistics teams. Najumi specializes in identifying hidden freight costs through data-driven auditing and works closely with CFOs and supply chain leaders to deliver measurable savings.
If you want to discover how ICC's forensic approach has helped one customer recover $200,000 in annual accessorial overcharges , the full episode contains concrete case studies and step-by-step audit checklists.
Verify HTS codes are accurate, current, and aligned with actual product descriptions before shipment to prevent duty rate misclassification.
Ensure complete and truthful labeling—customs officers cross-reference shipping labels against declared values and material details.
Clarify importer of record responsibilities with your legal team, as IOR liability determines who owes tariffs and when.
Review INCO terms (FOB, CIF, DDP) to understand how your selected trade term affects tariff and duty exposure.
Conduct regular audits between customers and brokers to catch classification code misalignment before customs penalties occur.
Why do shipping cost increases consistently outpace inflation rates year over year?
Shipping rates increase an average of 6% per year , regardless of inflation levels—a pattern that has held steady for the past 25 years. Even when inflation drops, carrier rate increases continue relentlessly, compounding year after year into substantial margin erosion for shippers.
A Structural Problem That Inflation Cannot Explain
The fundamental issue is that inflation is a poor benchmark for freight budgets . While inflation measures the general rise in consumer prices across the economy, shipping rates operate under different pressures. Oliver Najumi of ICC Logistics explains that carriers raise rates as a structural business practice, independent of broader economic conditions.
This year, the pressure is intensifying. As discussed in the episode , peak season surcharges are stacking atop new rate increases from October through January 2027, creating compounding cost exposure that most CFOs fail to anticipate because they budget off outdated numbers.
The Accessorial Cost Trap
Beyond base rate increases, hidden fees—known as accessorials—amplify the true cost of shipping far beyond the headline rate. One customer discovered in their freight audit that when weight and dimension thresholds changed, their accessorial costs jumped by $200,000 annually . A furniture shipper found that nearly 47% of their entire $400,000 annual shipping budget was consumed by accessorial charges alone.
These hidden fees grow at rates that dwarf inflation. An accessorial charge for items over 48 inches or 40 pounds increased from $9 in 2015 to $58.75 in 2024—a 582% increase over 11 years .
"There is no Bloomberg for freight, so it teaches you to be forensic in how you audit shipping operations."
Oliver Najumi — Executive Vice President, ICC Logistics. Oliver has led ICC's logistics optimization and auditing division since April 2014. With nearly 50 years of institutional expertise behind him, ICC acts as an impartial extension of CFO and supply chain teams, processing roughly $9 billion annually in shipping transactional data and uncovering rate errors, contract misalignment, and accessorial overcharges across major carriers including USPS, UPS, and FedEx.
The solution is not to accept these increases passively. Shippers who diversify their carrier base have recovered substantial savings. One $5 million UPS shipper customer saved $1.6 million annually (50% reduction) by moving just 30% of their low-weight volume to alternative carriers. Even a modest carrier diversification strategy revealed 33% savings opportunities in segments the primary carrier had served at premium rates.
Understanding why shipping outpaces inflation requires recognizing that rate increases are not market-driven reactions to economic conditions—they are carrier business model defaults. Learn exactly how to spot leakage, challenge inflated claims, and protect margin before the next round of increases hits in the full episode on Listenly .
Shipping rates increase 6% annually on average, a consistent pattern over 25 years that continues regardless of inflation levels.
Peak season surcharges from carriers like USPS are stacking through January 2027, creating compounding cost exposure most shippers underestimate.
Accessorial charges (fees for weight, dimensions, special handling) now consume 40–50% of total shipping spend for many companies and grow 5–10× faster than inflation.
Carrier diversification—moving even 30% of volume to alternative carriers—can recover 30–50% in savings on underutilized segments.